Pool reel for solar cover

I'm still paranoid about settling, so I'm going to have the south and west walls of the pool done with #5 40 ksi vertical rebar on 6 inch centers.  #5 is strong enough to actually support the entire pool weight (450,000 pounds filled) on the soil shelves,Pool reel for solar cover should the shelves not creep under that load.  I also put a 1 foot chamfer on the edge of the shelf under the cover vault.  The fillet of gunite that fills that chamfer, along with the rebar, will spread the torque from the pool wall hanging on that shelf.

[Update: I ended up with a mix of #3 40 ksi and #4 60 ksi rebar, with about half the strength necessary to hold up the whole pool. I figured I only had to hold up one end, and the rebar guy objected strongly to #5 -- he bent most of the rebar with his right knee!]

Another issue is the bond strength between the XPS insulation and the gunite.  I've since built the pump vault, which is insulated as well, and the XPS/concrete bond there is perhaps only 1 to 3 pounds per square inch shear strength. pool rechargeable vacuum cleaners If I assume 1 psi for the pool shell, then it will take about 140,000 pounds of shear, which is substantially less than the 450,000 pound filled weight of the pool.  This shear strength is comparable to the shear strength of the polyurethane bond to the soil.  This pool shell will be sitting on its bottom.  The polyurethane is substantially more springy than the polystyrene, and I think it will deflect the 0.3mm in shear that will happen when we fill the pool.